RF boards operate at significantly higher frequencies, starting from 100 MHz, which are crucial for communication signals in applications ranging from cell phones to military radars. Compared to conventional circuit boards, RF and microwave signals are highly susceptible to noise and require tighter impedance tolerances.
We leverage our extensive experience in manufacturing high-frequency circuit boards to ensure quality products delivered promptly.
Excello Circuits manufactures according to IPC guidelines and holds certifications to meet stringent standards, including:
Technical Specifications
| Category | Details |
|---|---|
| Layer Count | Single-sided to 24 layers |
| Hybrid Stack-Ups | Hybrid stack-ups with PTFE and non-PTFE |
| Surface Finishes | ENIG, immersion tin, OSP and more |
| Sequential Lamination | Up to 4 cycles |
| Aspect Ratio for Microvias | 0.75:1 |
| Aspect Ratio for Through-Holes | 10:1 |
| Minimum Hole Diameters | 5 mil for mechanical drill and 3.5 mil for laser drill |
| Back Drilling | Minimum 12-mil hole and +/-1 mil depth tolerance |
| Tolerances | +0.5 mil for laser routing and +/-3 mil for mechanical routing |
| Gold Plating | Selective and full-body hard and soft gold plating up to 120µ |
| Additional Capabilities | Countersink holes; Castellations; Cavities; Edge plating; Buried via / blind via / microvia; Gold fingers |
For more detailed technical information and our capabilities, click here to check our Technical Capabilities.
Common Applications
